AMS Compatible Multiboard Mount For LED Riser

The original design was not compatible with the AMS Riser from Benjamin Kott's LED Riser Kit, so I modified it to integrate the AMS riser and a Multiboard. (You can see the difference in the last two pics, my modified part, printed in red)FYI, for the entire width of the printer 13 octagons are needed. These are Part A connectors. Please print the appropriate Part B connectors: single or double. From the Multiboard documentation:Printing Guidelines:The printing orientation is as provided in the file. The print has been designed to be “3 wall perimeters” in wall thickness. Printed at a layout height of 0.2 mm. It doesn't need printing supports. Use the default 15% infill. This part has been designed with a tolerance of 0.25 mm. Your printer will need to be able to bridge gaps of up to 30 mm for some designs.Boost MeIf you liked it and found it useful, consider boosting this design!