Analysis Pod

This is a fictional Si-fi miniature of Analysis Pod / Scanning capsule display for you fantasy character or any object that is less than 80mm wide. This model uses an ESP32 operated by Wled app which is easy to install and use, without the need of any programming experience, the Wled has all the steps you need to install the firmware into the ESP32 with a simple plug it via USB and hit the install button and within seconds the lights will be on. -Model Key Features: Easy to print, assemble and operate. Rotating disc to display objects. Customizable light effect, colors, and patterns. silent motor. Acrylic tube to protect from dust and debris. Operates on 5 volts, from your pc or a simple power bank. Uses USB type C. -Filament used: Silver Silk PLA. Blue Silk PLA. Copper Silk PLA. Black PLA+ White PLA+ Support filament for PLA (optional but highly recommended. -Before you print: print plate should be cleaned with soapy water or IPA. machine should be properly maintained and lubricated. machine should be pre calibrated, Auto bed level, and pressure advance. Filament Flow rate should calibrated. Filament temperature should be optimized. -This is a multi color project so the ACE is required. -The Documentation section contains: Bill of Materials. Wiring diagram. Assembly guide. Here is another clips of color combinations and patterns.