Anemometer with wind vane - Parametric

All the hardware i will be using is necessary for the stock version. Though you can modify the parameters to fit your screws and bearings. I opted to use bearings since it makes the whole assembly pretty much silent. It is also very smooth.Printing:The only model that requires supports is Holder.stl. I recommend printing the .3mf files which already have the supports. Print this out of PETG since PLA can melt on sun.Non-printed parts:Bearings: 625zz (x2)Screws: m5x12 (x2); m3x16 (x6)Zip ties: (x2)Assembly:Press fit a bearing into Vane holder from the bottom, screw it to Vane attachment.Insert the Vane stick into Vane main, its a tight fit. Glue the fin to the back side of Vane stick. The high section facing up. And clamp it with the top part of vane holder.Press fit a bearing to the bottom of the Holder. Its quite a tight fit so you might need a clamp. Screw the bowls in place, make sure they are all facing the same way. Screw it to the Pole.<img src="https://makerworld.bblmw.com/maker