Anycubic Vyper direct drive

This is a mod to convert the **Anycubic Vyper** to direct drive.

The bracket weighs in at 40 grams (4 perimeters, 15% cubic infill, 7 top/bottom layers) and it's mounted to the existing carriage using stock hardware.
An extension or a longer extruder motor cable is needed in order to complete the mod (4 pin to 6 pin)
You will also need a **95 mm** long piece of bowden tube.

I opted for a pancake stepper (NEMA 17HS4023) to further reduce the weight, it's easily found on amazon everywhere in the world.

--

**For assembly check the reference pictures below.**

** Please note: the plastic component between the hotend connector and the metal plate won't fit anymore but it didn't serve any purpose other than esthetics.**

--

**Find out more about my designs here: https://cults3d.com/en/users/IL3D/creations**