Aptera Keychain

Update - Feb 16, 2024 - Recommended instructions (what I did for batches sent to other Aptera Ambassadors)

1. Print the "Aptera_keychain_2inch_v2_x_10.lys" option using lychee. Recommended use black resin.
2. Remove supports, clean in ipa or your preferred alternative (ie Mean Green or Denatured Alcohol)
3. Cure lightly using wash and cure (2 min), uv strip lights (10 min) or sun (3 hours)
4. (Only if resin in not black)
a. Dip in 50/50 mix of cheap airbrush paint and water (stir often - ps: don't generally buy cheap/createx airbrush paint). Keep for later steps
b. Dry upright for ~12 hours
c. Flip
d. Brush the bottom half ensuring to get paint into the Aptera emboss. It does not need to be evenly feathered
5. Using a drybrush with white model paint (warpaints matt white). Always start with the bottom rear and ensure the brush is very dry for the top.
6. With quick light strokes highlight the wheep pods, nose, sides and top. When brushing the top work from the