ArduSat-split boards

I thought this was a pretty neat model, but I didn't like the idea of using support to print the double sided boards. I split the boards through the center using Netfab. I also used 8-32 all-thread to tie it all together instead of the plastic rods. I added hex spacers as well. You'll need 4 of the 1Q spacers to to mount the camera to the angle (you'll have to drill 4 holes for in the angle mount) then double sticky tape or glue to mount the angled camera. I also included the spacers needed to space the boards out. You'll need 4 20mm spacers, and 8 each of the 10mm and 15mm spacers, 2 cameras and one of everything else. I did away with the printed up-rights, with the all thread you don't need them. 4 100mm pieces of 8-32 all thread, I tapped the existing holes in the bottom and used a friction fit on the top. It's not perfect, but it works and I think it looks pretty cool. Note: the flat frame stl file is the same as the original file and it includes the 4 rods and the 4 uprights that