ARKANE

Project: arkanePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 105.48x160mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyTerra Army Blue Transmission Distance: 0.3 PLA Generic azul medio Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Army Blue At layer #8 (0.72mm) swap to azul medio At layer #14 (1.2mm) swap to Orange At layer #18 (1.52mm) swap to Beige At layer #23 (1.92mm) swap to Jade White for the rest.