Thingiverse
Assembly Cube
por TimeFramed
17
Descargas
7
Likes
0
Makes
Cube than can be used to assemble perpendicular pieces.
The holes go all the way through, and are offset so that a screw can be put into each hole (it can be used in a box corner).
The holes were sized so that a #8 screw will "bite" securely without cracking the cube. However I found that some of the cubes I printed were cracking, so now I drill out the holes with a 5/32 bit. The screws fit much more loosely, but still bite the threads sufficiently.
They are also countersunk so that a "deck mate" type screw head will sit (nearly) flush. For that purpose, I drill out the hole larger so that the screw passes through freely, and anchors into the surface behind.
The holes go all the way through, and are offset so that a screw can be put into each hole (it can be used in a box corner).
The holes were sized so that a #8 screw will "bite" securely without cracking the cube. However I found that some of the cubes I printed were cracking, so now I drill out the holes with a 5/32 bit. The screws fit much more loosely, but still bite the threads sufficiently.
They are also countersunk so that a "deck mate" type screw head will sit (nearly) flush. For that purpose, I drill out the hole larger so that the screw passes through freely, and anchors into the surface behind.
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!