Thingiverse
AtomStack Red Laser Warning Light
door Zsquish
3
Downloads
12
Likes
0
Makes
Decoration light with transparent Top with AtomStack logo on three sides. Useful to signal a running laser engraving machine or just as decoration.
If you like what I'm doing you can [Support me on Ko-Fi](https://ko-fi.com/T6T4DXTSD)
### Why
This is my entry for the AtomStack Thingiverse challenge.
Also, a red light with a logo on it seems pretty nice.
### Design Details
A red light with a top that has the AtomStack logo on three sides.
Assembled, it has the dimensions of about 55x100x30mm (HxWxD). Scaling might be possible but not tested.
All parts come in small variations, depending on the parts at hand or what function is wanted. To make it easy for me to assemble the Thing I descided to use a 12V LED strip and a 24V plug-in power supply. That also gives me the option to connect it directly to a machine's control voltage if needed.
The Base of the Thing holds the electrical connector and a light switch (if needed).
A voltage converter, either a step-up or step-down co
If you like what I'm doing you can [Support me on Ko-Fi](https://ko-fi.com/T6T4DXTSD)
### Why
This is my entry for the AtomStack Thingiverse challenge.
Also, a red light with a logo on it seems pretty nice.
### Design Details
A red light with a top that has the AtomStack logo on three sides.
Assembled, it has the dimensions of about 55x100x30mm (HxWxD). Scaling might be possible but not tested.
All parts come in small variations, depending on the parts at hand or what function is wanted. To make it easy for me to assemble the Thing I descided to use a 12V LED strip and a 24V plug-in power supply. That also gives me the option to connect it directly to a machine's control voltage if needed.
The Base of the Thing holds the electrical connector and a light switch (if needed).
A voltage converter, either a step-up or step-down co
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
