Bad Moonz - HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 170x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA 3DPower Brown Transmission Distance: 0.2 PLA BambuLab Cocoa Brown Transmission Distance: 0.3 PLA HIGH SPEED 3DPower Flame Red Transmission Distance: 3.3 PLA HIGH SPEED 3DPower Papaya Orange Transmission Distance: 5.7 PLA HIGH SPEED 3DPower Amber Yellow Transmission Distance: 6.2 PLA HIGH SPEED 3DPower Pure White Transmission Distance: 2.3This print uses 7 unique filaments Swap Instructions: Start with Black At layer #6 (0.56mm) swap to Brown At layer #7 (0.64mm) swap to Cocoa Brown At layer #8 (0.72mm) swap to Flame Red At layer #11 (0.96mm) swap to Papaya Orange At layer #18 (1.52mm) swap to Amber Yellow At layer #24 (2mm) swap to Pure White At layer #26 (2.16mm) swap to Cocoa Brown for the rest