Bambu Lab P4 (Post-Print Processing Platform)

After almost 2 months now of 3D printing I found the counter next to my printer became cluttered with dozens of old calibration lines and I was setting the plate on whatever I had there, old boxes or filament rolls, while I cleaned off the calibration lines. I was bending the plate on the edge of the counter, often getting the plate dirty in the process as I had to set it down to change grip to bend it in the other direction. I also found that putting the Bambu Lab scraper back in it's little holder was a two handed job and a bit awkward. I thought if I had a little platform that was airy underneath so it would cool faster while I cleaned off the calibration lines, along with a little garbage bin for the scrap and an integrated scraper holder that you could just sort of toss the scraper into one-handed that would be handy, so I designed this. I call it the Post-Print Processing Platform, or P4 ('cause why not). The Bambu Lab plates pop onto the tab holder easily and the air underneath