bart

Project: bart.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 112.5x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.9mm and the Actual Depth is 1.7mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PLA BambuLab Basic Jade White Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.88mm) swap to Marine Blue At layer #12 (1.12mm) swap to Jade White At layer #13 (1.2mm) swap to Yellow for the rest.Boost Mese agradece