Slicer Discord
Basic Pulley – 3D-Druckmodell von MakerWorld MakerWorld
Other Hobby & DIY

Basic Pulley

36 Downloads
17 Likes
12 Makes
Zum Modell
I have been thinking a lot about pulleys lately, couldn't find any I wanted to print, so I modeled one of my own. It should be able to handle a fair load, but I haven't tested. I plan to use this to hang a hanging basket. You might need to scale the nut up a few% if it is too tight on the bolt. I highly recommend laying the outer body down on it's side using supports inside for the strongest print orientation along with plenty of walls and top and bottom layers, but I won't tell you how to live your life.I included a boxy version, as well as a more rounded version I think looks prettier, both are basically the same, in terms of function, I theorize however, the pretty version isn't as strong. both serve the same function, and fit everything else exactly alike. The pretty version will also need more supports.Print instructionsCategory: Engineering SummaryI have been thinking a lot about pulleys lately, couldn't find any I wanted to print, so I modeled one of my own. It should be able to
Kategorie
Other Hobby & DIY
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

1 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen