Basic Wind Turbine

A basic wind turbine design that can produce enough electricity to power a small LED light. I managed to print all of the parts on a stock Ender 3 using PLA, so it should print just fine on any printer out there. How to print:Material: PLA, PETG, ASALayer Height: 0.16 - 0.2mm depending on how well your printer handles overhangsInfill: All parts but the rotor blades should be printed with 30% infill, the rotor blades should have 30% at the base and 5% from where the blade startsNo supports are needed Parts needed:x3 Short M3 Screwsx1 24mm DC Motor with a 2mm shaftx1 32mm PVC Pipex1 15x32mm Bearing How to assemble:Assembly of the rotor and the motor holder.All parts should press-fit togheter after using a bit of force.Final assembly.Main_Back requires x3 M3 screws in order to properly attatch to Main_Hub. All other parts should press fit.I would highly recommend gluing of the press-fitted parts togheter so that the turbine can withstand stronger winds.