台盆支架Basin bracket

台盆固定方式有两种，传统的是瓷砖墙面打洞，新兴的是3d打印设计。设计出很高的支架，再大的热床也打不出来，好在有榫卯机构。利用榫卯结构切割成三份，打印完拼接（最好涂点胶水），没有任何问题。另外，底部走管如需要，可自己在切片中切割小孔。若是直接从底部排水就不用切割小孔。 There are two ways to fix the basin. The traditional method is to drill holes in the ceramic tile wall, while the emerging method is 3D printing design. Design a very high bracket, no matter how large the hot bed is, it cannot be made, fortunately there is a mortise and tenon mechanism. Cut into three parts using mortise and tenon structure, print and assemble (preferably with some glue) without any problems. In addition, if necessary, the bottom tube can be cut into small holes in the slice by oneself. If drainage is directly from the bottom, there is no need to cut small holes.