Baum Collapsible Bottle

Upload Baum.gcode on the SD card and launch it from the printer interface. Find Baum.gcode inside “Baum print files.zip” folder (download) Apply standard plastic adhesive tape (commonly made of PP) to the bed to ensure adhesion. Baum.gcode is compatible with all Bambulab printers (preferably use 0.6 nozzle), and with all other printers with at least 130x130x210mm build volume. Baum.gcode prints in 8h with 30g of Polypropylene (PP) filament. Tested with Formfutura PP The print profile is not provided because manual modifications of the exported print file (gcode) are required to make Baum watertight, so I suggest printing Baum.gcode instead of slicing the .stl How I sliced Baum.gcode: https://www.youtube.com/watch?v=qj2Xh6ys8mk Settings (Cura):from the start to the neck:layer height: 0.2mmline width: 0.6mmwall line width: 0.59mmwall line count: 1bottom layers: 4top/bottom pattern: zig zagtop/bottom line directions: [67,0,134,201]skin overlap percentage: 80%flow: 120%wall flow: 170%top/b