Beach Walker

This is a special crutch cap that can be put on and taken off a crutch or walking stick. The cap has a bigger surface so the user of these caps can walk on soft terrain.The spacers have to be fixed with the following:

- DIN 934 nuts M3
- DIN 7991 bolts M3x8mm

The beach walker itself has a tube on the outside and this is used to fix the beach walker to the spacers. To fix the beach walker you need a hose clamp that has an inner diameter of 55 mm.


This thing is invented for people with walking disabilities or those who don't have the strength to walk as much anymore to be able to walk on soft terrains like beaches or trails.

If you want to print this and make it functional then it is recommended you print this with nylon (PA 12) and use an SLS printer. FDM printing can be used but it won't be as strong as SLS printing.