Thingiverse
Beta Goat basic chassis
by Leiywen
8
Downloads
1
Likes
0
Makes
This is just a simple chassis for a Beta-Goat as I call it, it's based on the Gama-Goat but using live axle instead of independent suspension.
There's still bits you'll need to make such as a drive shaft, it's designed to be used with orlandoo hunter axles and 36mm autorc geko tyres.
Feel free to take it and do what you will with it. Have to admit, to see it up and running is pretty unique. If done correctly you should have 6WD with 4WS (100% front, 50% rear). Good luck and have fun.
There's still bits you'll need to make such as a drive shaft, it's designed to be used with orlandoo hunter axles and 36mm autorc geko tyres.
Feel free to take it and do what you will with it. Have to admit, to see it up and running is pretty unique. If done correctly you should have 6WD with 4WS (100% front, 50% rear). Good luck and have fun.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!