BL Led Controller Extended Plus Mountable Case

I wanted to mount my BLLED Controller on the back of my X1C but most of the designs I found are using magnets or wasn't for the extended plus version of the BLLED. So I made my own and flipped the controller such that the barrel plug is pointing downwards. MaterialsI printed mine in PETG from Sunlu but it should be printable for one filament you want. 2 x M3x25 screwsCAUTIONOn the back one screw has to be tapped first before mounting the caseThe antenna cable was routed around the back of the ESP (look at images)Screw in the LED cables before putting the ESP into the case (thats the weak point of the design)Make sure that the cables to the LEDs are long enough Models in Pictures(AMS Hub Organizer) https://makerworld.com/en/models/542919?from=search#profileId-460611(Chamber Fan Muffler) https://makerworld.com/en/models/495437#profileId-413696(Light Riser with Diffuser) https://makerworld.com/en/models/99746#profileId-106353(Side Spool Holder Foldable) https://www.printables.com/mode