Bookmark Eagle

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Can be printed with manual filament change only (setting filament change or pause in the slicer). No automatic material system required. There are two beds in the print profile - model size 50x150mm. 1st - bookmark without a hole. 2nd - bookmark has a negative part inserted. If you wan a lage size - download STL file 65x200mm. Or you can modify the X and Y dimensions. Do not adjust the height (Z) in your slicer! The layers would not be correct. You may print at higher layer heights below the Min Depth of 0.48mm. The Max Depth is 1.84mm and the Actual Depth is 1.84mm. PLA Anycubic Black Transmission Distance: 0.3 PLA Elegoo + Orange Transmission Distance: 6 PLA Elegoo + White Transmission Distance: 6 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to Orange At layer #12 (1.04mm) swap to White for the rest.