bookmark

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 46.15x100mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA BambuLab Matte Charcoal Transmission Distance: 0.6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Charcoal At layer #11 (0.96mm) swap to Beige At layer #20 (1.68mm) swap to Jade White for the rest.