Box with Hinge (Parametric)

First try in parametric CAD design. Basic container with an external hinge.
In the screenshot you can see the parameters that can be changed.

**If you don't want to use the magnet-holder, you can disable it via the timeline. There's a group at the end called 'magnet'.**

The box is symmetrical, that's why there's only half the box as stl-File. You can just print it twice. I recommend laying the hinge flat in you favourite slicer-software. Just rotate by 90 deg.

Please tell me what you think of it and if you like it, consider giving a small tip :)

For my print settings: The following worked the best for me

- Filament: Eryone PLA+
- Layer Height: 0.2mm (initial layer 0.3)
- Infill: 15%
- Print Speed: 55 mm/s
- Support: Yes (For the magnet holder)
- Adhesion: Brim