Bubble Planter

Note: The BambuStudio file is already pre-configured. If you prefer to use a different slicer, please apply the settings listed below. 1. For the Planter: -Layer Height: 0.28 mm -Fuzzy Skin Point Distance: 0.4 -Fuzzy Skin Thickness: 0.2 2. For the Base/Pot: -Layer Height: 0.28 mm -Fuzzy Skin Settings: Use the same values as above (0.4 distance / 0.2 thickness). Important Tip: If using the "Raw" file, please apply a modifier to the center of the pot to disable Fuzzy Skin on the fixing rods. This ensures a smooth fit between the planter and the base.