Button Box for Simulators

This is my Button Box for simulations, made with AliExpress-Electronics and an BBI-64 from Leo Bodnar made in Fusion 360, printed on P1S. I'll try to find all the links to my used buttons, switches and ignition key so that you can use the same ones. Wiring them up using the Leo Bodnar-Board requires some soldering, but it's an awesome project to do over a few days. I personally used PETG for this project, using a Carbon textured print plate for the Lid, adds a nice look without having to use some sort of carbon-vinyl. Other filament types should be fine too. To wire up the buttons: You can easily connect all the grounds and then just plug them into one of the BBI-64 ground pins, I personally went with one ground per Button-Style (so all together 7 grounds) Then just connect each “output” of the switch with one spot on the BBI-64. !Make sure to wire the Rotary encoders according to the BBI-64 configuration, making sure that the output for ex. rotary encoder 1 is on pin 0 for turning it