Slicer Discord
Cable cam TecSM – 3D-Druckmodell von Thingiverse Thingiverse

Cable cam TecSM

von Josue99
0 Downloads
0 Likes
0 Makes
Zum Modell
Simple cable cam system with adjustable wings.

Components needed:
Bearings:
https://www.amazon.com/-/es/PGN-6000-ZZ-Rodamiento-bola-blindado/dp/B07MXMRVVG

Wire jumpers.
https://www.amazon.com/Ribbon-Cable-10-wire-3ft/dp/B007R9SRN4

H bridge driver
https://www.amazon.com/-/es/Sparkfun-09457-driver-motor-TB6612FNG/dp/B01MF67DX6

Microcontroller
https://www.amazon.com/-/es/SparkFun-ESP8266-Thing-Microcontrolador-Serial/dp/B088VQRHVV/ref=sr_1_3?__mk_es_US=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=SparkFun+ESP8266+Thing&qid=1607106067&sr=8-3

Pines:
https://www.amazon.com/-/es/Break-Away-20-pin-franja-Cabecera-Raspberry/dp/B0756KM7CY/ref=sr_1_33?__mk_es_US=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=Break+Away+Male+Headers+-+Right+Angle&qid=1607106239&sr=8-33


Motor 12V
https://www.amazon.com/-/es/Greartisan-19RPM-3000RPM-reducci%C3%B3n-velocidad-engranajes/dp/B07FVMVGM3/ref=sr_1_2?__mk_es_US=%C3%85M%C3%85%C5%BD%C3%95%C3%91&dchild=1&keywords=Micro%2BGear
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Ca. Druckzeit
4 h
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen