Calibration Bundle #2

Two models that will help you calibrate retractions and bridging. The first model is 20 mm per side and needs to be printed without support, the second model is 25 mm per side. If you notice stringing using FDM printers, then you need to adjust your retraction settings according to the filament that is being used.Printer: CR10 Smart ProSlicer: Cura 4.8Bed Type: PEIFDM - PLA - 1.75mmQuality: Normal0.8 mm wall thickness / 2 lines per wall 210° hotend / 60° bed50 mm/s (for starters)Retraction enabled (picture for reference)Fan: 100%Bedplate adhesion: skirtNo Support