Calibration Bundle #4

The first one is the standard x,y,z - 1" (25.4 mm) calibration cube . The second cube has the same outer dimensions but it has a 2° draft angle in the inside and will test ghosting aswell.Make sure to use a caliper (vernier) to measure after printing.Printer: CR10 Smart ProSlicer: Cura 4.8Bed Type: PEIFDM - PLA - 1.75mmQuality: Normal0.8 mm wall thickness / 2 lines per wall210° hotend / 60° bed50 mm/s (for starters)Retraction enabled (picture for reference)Fan: 100%Bedplate adhesion: skirtNo Support