Calibration Bundle #6

Print a batch of this Lego blocks in different areas of your bed to test leveling and the repeatability of your 3D printer. Make sure that the blocks fits with slight interference one on another to assure a good assembly. Using a caliper to measure the prints is highly recommended. I uploaded two different versions of this blocks with different fit, let me know which one was your favourite.Have fun while performing this test!Printer: CR10 Smart ProSlicer: Cura 4.8Bed Type: PEIFDM - PLA - 1.75mmQuality: Normal0.8 mm wall thickness / 2 lines per wall210° hotend / 60° bed50 mm/s (for starters)Retraction enabled (picture for reference)Fan: 100%Bedplate adhesion: skirtNo SupportPrinter: CR10 Smart ProSlicer: Cura 4.8Bed Type: PEIFDM - PLA - 1.75mmQuality: Normal0.8 mm wall thickness / 2 lines per wall210° hotend / 60° bed50 mm/s (for starters)Retraction enabled (picture for reference)Fan: 100%Bedplate adhesion: skirtNo Support