Caliburn Type-m

Update: 2 Nov 2018

I made this because I wanted a shorter prime based on the original Caliburn. I managed to reduce it by 1-1/4" in the end. The blaster is further shortened by around 5-1/4".

Part List:

PlungerTubeButt-m: This is a printed version of the shortened Plunger Tube End if you don't want to cut any polycarb/acrylic tube.

SearSpacer6p60x9: This is the spacer for the Sear part where you would secure both ends with screws. I can't find any available nylon spacer. Use M3x6 screws with this.

RailgasmForeGrip-m: The original Railgasm Grip shortened. This is tested, needs the priming bars manually drilled.

Back_Butt-m: The spring post shortened to compensate the shortened back end of the plunger tube.

RailgasmForeGrip-m-V2: A cleaner and refined version of the grip. Untested, screw holes might not line up with V1.

PlungerHead38mm: Use this with your 38mm OD PT.

PlungerHead40mm: Use this with your 40mm OD PT.

Ram2o-m: Added base to compensate shorter sp