Thingiverse
Camera Mount Ai3 Adapter
por HDRI
0
Descargas
3
Likes
0
Makes
This adapter attaches magnetically to the left side of the x-axis on the Anycubic i3 Mega.
Clearance is sufficient in all dimensions.
The adapter is made up by three printed parts and two 8x3mm magnets.
Everything can be pushed into place.
Tolerances are tight and for an easy fitting i recommend sanding the pins in diameter as needed. (e.g. with a drill press - clamping the piece in and running a file along the edge)
This is a remix for:
Prusa Bear/Zaribo/MK3 Creality Adjustable Camera Mount
by codiac2600 January 30, 2019
Clearance is sufficient in all dimensions.
The adapter is made up by three printed parts and two 8x3mm magnets.
Everything can be pushed into place.
Tolerances are tight and for an easy fitting i recommend sanding the pins in diameter as needed. (e.g. with a drill press - clamping the piece in and running a file along the edge)
This is a remix for:
Prusa Bear/Zaribo/MK3 Creality Adjustable Camera Mount
by codiac2600 January 30, 2019
HDRI también publica en
7 modelos adicionales en 2 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
