Thingiverse
Camera shutter
door John99george
11
Downloads
14
Likes
0
Makes
Materials:
Oak dowel rod 8mm, 300mm lengths purchased.
Skateboard bearings 608ZZ/2RS ABEC5 hybrid ceramic. Size 8x22x7. (5 are required)
Springs 12mm OD, 0.8mm Stainless steel, R0.31N/mm/cm. usable length 115mm
Solvent waste pipe 25mm OD, thickness 2.2mm, cut to 154mm lengths
3mm dowel pins, varied sizes
Bearings F623ZZ mini flanged bearings
Also requires a jewellry drill and a pipe cutter.
Shutter cloth is made from ripstop fabric painted with several thin layers of blackboard paint and cut to shape using a paper guillotine. Metal stiffeners are required to help the aperture keep its shape.
Oak dowel rod 8mm, 300mm lengths purchased.
Skateboard bearings 608ZZ/2RS ABEC5 hybrid ceramic. Size 8x22x7. (5 are required)
Springs 12mm OD, 0.8mm Stainless steel, R0.31N/mm/cm. usable length 115mm
Solvent waste pipe 25mm OD, thickness 2.2mm, cut to 154mm lengths
3mm dowel pins, varied sizes
Bearings F623ZZ mini flanged bearings
Also requires a jewellry drill and a pipe cutter.
Shutter cloth is made from ripstop fabric painted with several thin layers of blackboard paint and cut to shape using a paper guillotine. Metal stiffeners are required to help the aperture keep its shape.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
