Thingiverse
Case backplate for Raspberry Pi Camera v2.1
par TrunkFullaAmps
264
Téléchargements
135
Likes
2
Makes
Update for the back piece of [thing:92208](https://www.thingiverse.com/thing:92208) to fit v2.1 of the raspberry pi camera.
The v0.4 back piece has been modified to better fit the v2.1 pi camera:
- The mounting posts have been moved closer together. They were originally too far apart for the holes in the camera board.
- The sides have been cut out to allow room for the additional electronics on the underside of the camera board.
This piece of the case should work with any other thing that uses the original case front and needs to fit a v2.1 pi camera board.
The v0.4 back piece has been modified to better fit the v2.1 pi camera:
- The mounting posts have been moved closer together. They were originally too far apart for the holes in the camera board.
- The sides have been cut out to allow room for the additional electronics on the underside of the camera board.
This piece of the case should work with any other thing that uses the original case front and needs to fit a v2.1 pi camera board.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
