Thingiverse

CaseBuilderLib

von hotwolf

38 Downloads

28 Likes

11 Makes

# CaseBuilderLib
Design 3D printed cases for random things!

![Title](https://raw.githubusercontent.com/hotwolf/CaseBuilderLib/master/Examples/Gauge/howto_title.jpg)

## How to use this library:

1. **Preparation**
1. Make a copy of the CaseBuilderLib project template
(**CaseBuilderTemplate.scad**).
The template is intended to be used with the OpenSCAD
Customizer.

![Step 1.1a](https://raw.githubusercontent.com/hotwolf/CaseBuilderLib/master/Examples/Gauge/howto_step1_1a.jpg)

The design of a customized case is done in three stages.
Start by setting the **`Stage`** variable to **"Model"**
(value = 1).

![Step 1.1b](https://raw.githubusercontent.com/hotwolf/CaseBuilderLib/master/Examples/Gauge/howto_step1_1b.jpg)

2. **Model Stage**
1. Design a model of the parts of your case content as children
of the **`CaseBuilder()`** module.
Construct each part of the content using primitive shapes.

box case configurable hinge latch library openscad openscad library print in one print in place Print In Place Hinge protective box case configurable hinge latch library openscad openscad library print in one print in place Print In Place Hinge protective

Quelle

Thingiverse

Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz

Warum?

Print-in-place-Design

Print-in-place

Supports 1/3

Zusammenbau 0/3

Einstellungen 1/3

Druckbett 0/3

Nachbearbeitung 0/3

Drucker