Cat

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x150mm in size.You may print at higher layer heights below the Base Thickness of 0.56mm.The Max allowed Thickness is 2.08mm and the Actual Thickness is 2.08mm.Filaments Used: PLA ****** + Black Transmission Distance: 0.3 PLA Sunlu META Grey Transmission Distance: 3.6 PLA ****** Basic White Transmission Distance: 7 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Grey At layer #12 (1.04mm) swap to White for the rest.