chandra

Project: chandra fire.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.07998mmFilaments Used:#000000 PLA BambuLab Basic Black Transmission Distance: 0.6#c00d1e PLA BambuLab Basic Red Transmission Distance: 4#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6#ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions:Start with BambuLab Basic BlackAt layer #7 (0.64mm) swap to BambuLab Basic RedAt layer #10 (0.88mm) swap to BambuLab Basic YellowAt layer #17 (1.44mm) swap to BambuLab Basic Jade White for the rest.