Charizard Bookmark

Charizard Bookmark created with hueforge, this model have a print profile with ACE and another with pause. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 50x150mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.2mm   Filaments Used: PLA Anycubic Black Transmission Distance: 0.6 PLA Anycubic Orange Transmission Distance: 7 PLA Anycubic Yellow Transmission Distance: 6 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Orange At layer #20 (1.6mm) swap to Yellow for the rest.