Charizard hueforge

Print at 100% infill with a layer height of 0.12mm with a base layer of 0.2mmThe Model is 100x177.48mm in sizeYou may print at higher layer heights below the Min Depth of 0.44mmThe Max Depth is 3.6mm and the Actual Depth is 3.3mmFilaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Blue Transmission Distance: 4 PLA Sunlu Meta red Transmission Distance: 7 PLA+ Sunlu Orange Transmission Distance: 5 PLA Sunlu Meta yellow Transmission Distance: 10 PLA+ Sunlu Sky Blue Transmission Distance: 4 PLA+ Sunlu White Transmission Distance: 5 PLA+ Sunlu Pure Yellow Transmission Distance: 5This print uses 8 unique filamentsSwap Instructions: Start with Black At layer #5 (0.68mm) swap to Blue At layer #6 (0.8mm) swap to red At layer #8 (1.04mm) swap to Orange At layer #13 (1.64mm) swap to yellow At layer #14 (1.76mm) swap to Sky Blue At layer #17 (2.12mm) swap to White At layer #23 (2.84mm) swap to Pure Yellow At layer #25 (3.08mm) swap to red for the rest.