Charizard

Project: Goth charizard evolutions.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 111.72x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm #080a0d PLA PolyLite Black Transmission Distance: 0.3 #545454 PLA BambuLab Basic Dark Gray Transmission Distance: 0.6 #74777d PLA Overture Light Gray Transmission Distance: 0.7 #fafafa PLA Protopasta White Transmission Distance: 3This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Dark Gray At layer #15 (1.28mm) swap to Light Gray At layer #21 (1.76mm) swap to White for the rest.