3DSEARCH

Discord

Charmander (Mini) – 3D printable model from MakerWorld

MakerWorld

Sculptures

Charmander (Mini)

by João Salvado · Sculptures

126 Downloads

18 Likes

39 Makes

Go to Model

Model made on BambuLab A1, other printers will work as well. With the use of AMS, make multiple objects so you dont waste so much filament for a single object.One Charmander takes 8 hours 30 minutes to print, 10 of them take about 12 hours.Remixed by coloring in bambu studio for ams printing, flame in the tail also a bit shorter so it doesnt fall.

MINI mini miniature Pokemon charmander tiny little AMS AMS - Lite A1 bambu lab a1 deco decoration keychain pokemon

Category

Sculptures

Source

MakerWorld

Published

13.06.2025

Updated

30.04.2026

What you need to print this: Intermediate

Why?

supports needed · 2 colors

Single piece Supports required 2 colors / AMS

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Min. bed size

50 mm (Small)

Colors

2 (AMS/MMU recommended)

Est. print time

8 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Charmander (Mini)?

Any FDM printer should handle Charmander (Mini) just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 50 mm is recommended.

Does Charmander (Mini) need supports when printing?

Yes, Charmander (Mini) will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Charmander (Mini)?

According to the design notes, Charmander (Mini) takes approximately 8 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

Is Charmander (Mini) beginner-friendly?

Charmander (Mini) is a mid-level print. A bit of experience helps, but it's nothing a careful beginner can't tackle with standard slicer settings.

What file format is Charmander (Mini) available in?

Charmander (Mini) is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Charmander (Mini) free to download?

Yes, Charmander (Mini) is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee

DE EN FR ES IT NL