MakerWorld

Characters

Christmasaurus

by Stefarfan · Characters

13 Downloads

7 Likes

10 Makes

Der Weihnachtosaurus aus der gleichnamigen Buchreihe “Der Weihnachtosaurus” zum selber bemalen. Größe der Figur: 100 x 41 x 72 mm

Category

Characters

Source

MakerWorld

Published

21.11.2025

Updated

04.03.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

ASA

Min. bed size

100 mm (Medium)

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for Christmasaurus?

Any FDM printer should handle Christmasaurus just fine. It's been printed on machines like Bambu Lab A1 Mini, Prusa Mini+, Creality Ender 3, most FDM printers. A minimum build volume of 100 mm is recommended.

Does Christmasaurus need supports when printing?

Yes, Christmasaurus will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

What file format is Christmasaurus available in?

Christmasaurus is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Christmasaurus free to download?

Yes, Christmasaurus is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

1 Suggestions

Christmasaurus

Similar Models

Add to Collection