MakerWorld
Other Miniatures
Voir le modèle
Chubby Chibis - Sonic the Hedgehog
58
Téléchargements
54
Likes
22
Makes
This is part of a series of chubby little stout friends that sit happily on your desk! See the bottom of the post for other Chubby Chibis you can collect! Each plate should fit an A1-Mini! As seen above, I've included the following plates: 4 x Full Color1 x Full Color4 x Single Color1 x Single Color All models have flush to infill enabled to help reduce waste. Walls are set to 3 to help shield the viewer from any colors that might be seen on the inside. It is 98% effective. Should you desire perfection, either raise the wall count to 4, or, disable flush to infill. This will increase filament usage and the cost of perfection. It wasn't the chilidogs. I swear. My flushing multiplier ratio is at 1.00x. I didn't see any bleed from color to color, though I suppose artifacting is possible if strings are floating around the chamber or something. <img src="https://makerwor
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !
