Cigarette Case V2

Cigarette Case Version 2This is the tweaked version of my favorite project. The case holds 10 standard sized cigarettes. ( ~ 84x8mm)Five in the front compartment, and five in the back. It is now easier to assemble, features only standard components (M2 screws instead of some random nails i had lying around), is less complicated to print and requires less post-processing. What you need for the assembly:few drops of superglue6x M2x16 cylinder head screws (DIN 912 / ISO 4762) Tips for printing:The different components are pre-oriented for optimal resultsI strongly recommend printing the hooks with PETG, or something similar flexible!check if the layer adhesion of your PETG is good. I encountered some issues in which the little arm of the hook broke off when closing the hatch.Please print a test hook and try to put some force onto the little arm to see if it holds up. (has to flex like max. 0.5 - 1mm)I increased the nozzle temp by 5-10°C, and reduced printing speed. This solved my issue.An