Jewelry & Accessories STL Download - Circle Ringsby Shack3D_print

Hi friends, for our 3D printable jewelry collection, we wanted to create new rings. Circle Rings, is a new set, composed of 3 different rings. For the design we were inspired by circles and we tried, by overlapping and intertwining the circles, to create new and particular shapes. The rings have a diameter of about 23 mm, we scaled them to the size we needed at about 20 mm including the external diameter. We printed them with our Elegoo saturn 3 ultra with water-washable resin, Smoky black and Clear Blue. After washing and curing we coated them with transparent acrylic enamel. We did not rotate the file, we left it in the position of adherence to the plane and we used light supports but in high number. 15 full rings take about 1h 20 m of printing and about 28 g of material. As far as the print settings are concerned, we followed those specified by Elegoo for their washable resin. I hope you like it. As always we thank you for the support you give us, if you like our designs follow us and support us also on our social pages (Instagram and tiktok, X) Shack3d_print. We will be happy to see the result of your prints, share the photos with us by tagging us on our social pages, don't be shy. A thousand thanks. Love, Marina from Shack3d_print 3D printing settings We printed them with our Elegoo saturn 3 ultra with water-washable resin, Smoky black and Clear Blue. After washing and curing we coated them with transparent acrylic enamel. We did not rotate the file, we left it in the position of adherence to the plane and we used light supports but in high number. 15 full rings take about 1h 20 m of printing and about 28 g of material.