Clock hanger

Design ConceptI designed a small flat clock for my printing space, but it wasn't until I had printed and assembled the clock that I realized I would need a way to hang it. So, I came up with this basic hanger that slips over the clock mechanism and provides a way to mount the clock.It's made to suit a clock mechanism that is 55mmL x 55mmW x16mmH but should be easily scalable in your slicer to suit your needs.I purchased the clock mechanism from some company called bamboo, I thought they sold panda food or something but apparently not.Printing SuggestionsI've used Hyper PLA with a layer height of 0.2mm.Walls= 3No supports, just print with the hanging loop on the build platePrint with a Brim or mouse ears on each corner.IMPORTANT>>>You will need to make sure that it is a tight fit on your mechanism, if it's too loose the hanger could slide off your clock resulting in a damaged clock.If you're assembling a new clock with exposed hands like mine, I would also recommend fitting the hanger before fitting your clock hands to minimize the potential of bent clock hands.