CM #2

rint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA+ Numakers Chocolate Brown Transmission Distance: 0.4 PLA+ Numakers Rust Copper Transmission Distance: 2.1 PLA+ Numakers Cool White Transmission Distance: 1.8 PLA+ Numakers Lemon Yellow Transmission Distance: 5.7 PLA+ Numakers Bahama Yellow Transmission Distance: 3.6 PLA+ Numakers Outrageous Orange Transmission Distance: 4.7This print uses 6 unique filamentsSwap Instructions: Start with Chocolate Brown At layer #10 (0.52mm) swap to Rust Copper At layer #20 (0.92mm) swap to Cool White At layer #25 (1.12mm) swap to Lemon Yellow At layer #29 (1.28mm) swap to Chocolate Brown At layer #35 (1.52mm) swap to Rust Copper At layer #45 (1.92mm) swap to Bahama Yellow At layer #48 (2.04mm) swap to Outrageous Orange At layer #49 (2.08mm) swap to Cool White fo