CM Devil #4

***Notice, This print requires a .2mm nozzle and 0.02mm layer heights, it will take 40 hours to print***Print at 100% infill with a layer height of 0.02mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.3mmFilaments Used: PLA+ Numakers Pitch Black Transmission Distance: 0.8 PLA+ Numakers Dark Grey Transmission Distance: 4.8 PLA+ Numakers Light Gray Transmission Distance: 3.2 PLA+ Numakers Pure White Transmission Distance: 4.8 PLA+ Numakers Nuclear Red Transmission Distance: 2.8 PLA+ Numakers Lemon Yellow Transmission Distance: 11This print uses 6 unique filamentsSwap Instructions: Start with Pitch Black At layer #18 (0.5mm) swap to Dark Grey At layer #26 (0.66mm) swap to Light Gray At layer #28 (0.7mm) swap to Pure White At layer #30 (0.74mm) swap to Dark Grey At layer #32 (0.78mm) swap to Nuclear Red At layer #36 (0.86mm) swap to Lemon Yellow At layer #41 (0.96m