CM Devil #8

***Notice, This print requires a .2mm nozzle and 0.02mm layer heights, it will take 40 hours to print***Print at 100% infill with a layer height of 0.02mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.2mmFilaments Used: PLA+ Numakers Midnight Gray Transmission Distance: 0.2 PLA+ Numakers Pitch Black Transmission Distance: 0.8 PLA+ Numakers Dark Grey Transmission Distance: 4.8 PLA+ Numakers Simply Silver Transmission Distance: 0.5 PLA+ Numakers Pure White Transmission Distance: 4.8 PLA+ Numakers Nuclear Red Transmission Distance: 2.8 PLA+ Numakers Lemon Yellow Transmission Distance: 11 PLA+ Numakers Light Gray Transmission Distance: 3.2This print uses 8 unique filamentsSwap Instructions: Start with Midnight Gray At layer #18 (0.5mm) swap to Pitch Black At layer #24 (0.62mm) swap to Dark Grey At layer #26 (0.66mm) swap to Simply Silver At layer #29 (0.72mm) swap