Coaster Stacking

Stacking coasters. There are two file options. The first is a print as normal solid model. The second is intended to pack with air dry clay for added weight. For option two the print will need to be paused at the layer just before it begins printing the top of the base cavity(layer 20 if at 0.2mm layer height). At this point you will pull the clay tray off of the print bed and pack it with clay, try to make it as flat as possible. Then you will insert the clay tray into the print and resume the print. This is a nice way to add weight to the print.   If option two is desired then you can download the clay fill coaster + the clay tray and slice them, or the print file is already sliced using proper supports and has a pause at the proper layer height to remove the clay tray and pack it with clay.  Filament pictured is Overture Rock White PLA  Infill - 15%  Nozzle Temp - 210C Bed Temp - 60C Support - Yes, bottom lip of the coaster.  Layer Height - 0.2mm