Coffee coaster

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm  The Model is 100x100mm in size  You may print at higher layer heights below the Min Depth of 0.72mm  The Max Depth is 2.3mm and the Actual Depth is 2.3mm Filaments Used: PLA Anycubic Black Transmission Distance: 0.3 PLA Bambulab Basic Brown Transmission Distance: 2 PLA Elegoo Basic White Transmission Distance: 7 This print uses 3 unique filaments Swap Instructions: Start with Black At layer #16 (1.36mm) swap to Brown At layer #19 (1.6mm) swap to White for the rest.