Corner shelf

This corner shelf has a 210mm radius with a slightly raised edge on top.

The screw holes are sized for M4 screws and the holes can be capped for a cleaner look.

I've removed the previous versions of the screw hole cap, as it wouldn't fit in over top of a screw head. Hopefully the new shorter version will be a better fit.

Note: I re-uploaded the shorter version of the screw hole cap, as the STL file wasn't properly oriented with it perfectly flat and was causing me a bit of confusion as to why the cap's surface wasn't printing as a smooth surface.

I've also added a slightly thicker version (1.2mm vs 0.8mm) of the screw caps, as the old ones were a bit too translucent when printed in white PLA.

Note: The caps in the photo are the thinner ones, as I haven't gotten around to
replacing them yet.